Description
Take command of your RV solar system with a Renogy Complete Solar Kit! We provide basic component, and you can also choose the full component with battery and inverter or not.
This kit comes with the tools necessary for a new system: three Renogy100 Watt 12 Volt Flexible Monocrystalline Solar Panels, one 12V 50A DC-DC On-Board Battery Charger with MPPT, one 20ft 10AWG Solar Adaptor Kit, one 8ft 4AWG Tray Cable,one 20A Solar Connector Waterproof In-Line Fuse Holder w/ Fuse , one pair of branch connectors, two 100Ah 12 Volt Smart Lithium-Iron Phosphate Battery，one 2000W 12V to 230V Pure Sine Wave Inverter (with UPS Function) ,and one pair of Battery Interconnect Cables . Let's travel in comfort with a vehicle that is both solar powered and drive-charged.
If you have any questions regarding this product, please submit a case !
Key Features
Efficient- Extremely Flexible-This 100W solar panel can flex up to 248 degrees, minimizing the mounting and even issues for a curved surface. Where rigid panels are inconvenient to install, get this one.
- Ultra Lightweight-Light as 4.2 pounds, this product weighs 1/4 of its rigid counterpart. Travel light with solar, embrace possibilities.
- Super Thin Lamination- This Renogy 100W flexible panel is only 0.08 inches thick! It is about 95% thinner than its rigid counterpart, ideal for a stealthy solar setup.
- Weather Resistance- Rigorously tested, the 100W panel can withstand extreme winds of up to 2400 Pa and snow loads of up to 5400 Pa. Fearless of extreme climates, backup your brave journey.
- Easy Installation- Six metal reinforced mounting holes, simple to install. You can also mount it with silicone structural adhesive.
- High efficiency solar cells-21% Monocrystalline Cell Efficiency, 15% Module Efficiency.
- Electronic overload protection with automatic shutdown.
- Built-in internal backup DC fuse provides added safety.
- Low battery voltage protection with automatic shutdown.
- Over temperature protection with automatic shutdown.
- Output short circuit protection.
Smart
- 3-phase MPPT Charging Technology-With Built-in Maximum Power Point Tracking (MPPT), Renogy DC-DC On-Board Battery Charger will charge your service batteries with maximized solar power, providing 3-phase charging (Bulk, Boost and Float) to regulate the whole charging and ensure the batteries will be accurately charged at the correct voltage levels to 100%.
Auto-Balance
- Connects multiple batteries in parallel safely without internal state non-uniformity issues.
- Ultra-Safety-The battery management system (BMS) provides comprehensive protection to the battery and manages the charging/discharging process wisely.
- Uncompromised Quality-State-of-the-art battery cells ensure a lifespan of more than 4000 cycles, 100A continuous discharge current, and a wide range of operation temperature.
- Communication Port-The RJ45 communication ports enable data transmission to meet the needs of different usage scenarios.
Package Includes
| 100 Watt 12 Volt Flexible Monocrystalline Solar Panel（basic） | Solar Connector Waterproof In-Line Fuse Holder w/ Fuse（basic） |
|---|---|
| Maximum Power at STC: 100W | Rated Current: 20A |
| Maximum System Voltage:600V DC(UL) | Rated Voltage: 1000 V DC |
| Open-Circuit voltage (Voc): 22.5V | Degree of Protection: IP2*/IP67 |
| Short-Circuit Current (Isc): 5.75A | Flame Class: UL94-V0 |
| Optimum Operating Voltage (Vmp): 18.9 V | Safety Class: II |
| Optimum OperatingCurrent (Imp): 5.29A | Insertion Force / Withdrawal Force: ≤50N / ≥50N |
| Weight: 4 lbs / 1.8kg | Temperature Range: -40 to +125°C |
| Panel Dimensions: 48 x 21.5 x 0.08 In / 121.9 x 54.6 x 0.2 cm | Contact Resistance of Plug Connector:1mΩ |
| Connectors: Solar Connectors | Fuse Can Replace |
| Cables: 12 AWG, 17.7In(Negative Cable), 5.9In(Positive Cable) | |
| Maximum Series Fuse Rating: 15 A |
| 20Ft 10AWG Adaptor Kit（basic） | Battery to Charge Controller Tray Cables （basic） |
|---|---|
| Length: 20ft | Length: 8ft |
| Rating Voltage: 600/1000V | AWG: 4AWG / 21.2mm² |
| Temperature: -40°F to +185°F | Terminal Size: 3/8 in Lugs (M10) |
| Backup Battery Charging Mode : MPPT | Max. Current: 95A |
| Rating Voltage: 600/1000V |
| 3 to 1 Solar Branch Connectors MMMF+FFFM Pair（basic） | Battery Interconnect Cable（optional） |
|---|---|
| Maximum working voltage: DC1000V | Length: 12In |
| Rated Current : 30A | Size：1AWG |
| Flame class: UL94-V0 | Terminal：5/16In Rings Terminals at Both Ends |
| Shell Protection degree: IP65 | Stranding：Class K 30AWG Bare Copper Stranded |
| Ambient temperature range: -40°C to +85°C | Operating Voltage:600/1000 V |
| Pollution degree: 2 | Maximum Operating Temperature:221°F Dry, 167°F Wet |
| DCC50S 12V 50A Dual Input DC to DC Battery Charger with MPPT（basic） | 12 Volt 100Ah Smart Lithium-Iron Phosphate Battery（optional） |
|---|---|
| System Voltage : 12VDC | Rated Capacity: 100Ah |
| Battery Voltage Range : 9-16VDC | Nominal Voltage: 12.8 V |
| Maximum Charging Current : 50A | Dimensions: 11.4 x 6.8 x 7.4 inch / 289 x 172 x 187.5 mm |
| Backup Battery Charging Mode : MPPT | Weight: 26 lbs. / 11.8 kg |
| Max. Solar Input Voltage : 25V | Cycle Life(0.2C,25℃): 80%DOD 4000 Cycles |
| Maximum Alternator Input Power : 660W | Maximum Continuous Charging Current: 50 A |
| Communication Protocol:RS485 | Maximum Continuous Discharging Current: 100A |
| Protection Rate: IP54 | |
| Connection Method: Parallel |
| 2000W 12V to 230V Pure Sine Wave Inverter（optional） | |
|---|---|
| Input Voltage: 12VDC | |
| Continuous Power: 2000W | |
| Output Voltage: 220VAC±10 | |
| Output Frequency (Nominal): 50Hz±0.3 | |
| Output Wave form:Pure Sine Wave | |
| Dimensions: 442*220*92 mm | |
| Weight: 4.8Kg |
Warranty Information
| Panels |
25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate 5-year material and workmanship warranty |
| Accessories | 1-year material warranty |
 |
|||
 |
|||
| Please click the links below to download the manuals: | |||
| DCC50S 12V 50A Dual Input DC to DC Battery Charger with MPPT | |||
| 12 Volt 100Ah Smart Lithium-Iron Phosphate Battery | |||
| 2000W 12V to 230V Pure Sine Wave Inverter | |||
