The Renogy Adventurer is a 30A PWM solar power charge controller that is designed to be used with 12V or 24V photovoltaic systems. This advanced negative-ground controller is designed for aesthetically clean flush mounting on RV or camper walls, however if flush mounting does not appeal to you, the included Adventurer Surface Mount Attachment give you the option to forgo it. Integrating highly efficient PWM charging, the Adventurer increases battery longevity by regulating the charge flowing from the solar panels to the battery bank. It features an LCD screen for displaying system operation information and data, and allows for full control of parameter settings. This charge controller comes equipped with a fully comprehensive self-diagnostic system and electronic protection functions to prevent damage from installation mistakes or system faults.
If you have any questions regarding this product, please email email@example.com.
Renogy Adventurer 30A PWM Charge Controller w/ LCD Display
Renogy Battery voltage sensor
Renogy Temperature sensor
|Renogy 30A PWM Flush Mount Charge Controller|
|Nominal Voltage: 12 VDC/ 24 VDC||Max. PV Input Power: 400W(12V), 800W(24V)|
|Rated Charge Current: 30A||Max. PV Input Voltage: 50 VDC|
|Equalization Voltage: Sealed: 14.6 V; Gel: None; Flooded: 14.8 V||Boost Voltage: Sealed: 14.4 V; Gel: 14.2 V; Flooded: 14.6 V|
|Float Voltage: 13.8 V||Under Voltage Warning: 12V / 24V|
|Self-consumption: ≤13mA||Temperature Compensation Coefficient: -3mV/°C/2V|
|Operating Temperature: -13°F to 131°F||Storage Temperature: -31°F to 176°F|
|Enclosure: IP20||Dimensions: 6.56 x 4.50 x 1.90 inches|
|Terminals: Up to 4 AWG||Weight: 0.6 lbs|
|Charge Controllers||1-year material warranty|