Description
No matter how long your journey is; with the Renogy 400 Watt Starter Kit you can be confident you are getting the most out of your system. A Starter Kit can give you the freedom to travel further from the grid without having to worry about how you will recharge your most important small electronics. The Renogy 400W Monocrystalline Starter Kit is designed for customers new to solar, or those looking to expand on an existing power system.
The Starter Kit is ideal for several off-grid applications, including RVs, trailers, boats, sheds, and cabins — providing many benefits, including, but not limited to, quiet power production and grid independence. This kit comes with the tools necessary for a new system: four Renogy 100W 12V Monocrystalline Solar Panels(Compact Design), one 30A PWM Wanderer Charge Controller, one 20ft 10AWG MC4 Adaptor Kit, one 8ft 10AWG Tray Cable, three pairs of branch connectors, and four sets of Z-brackets. Start your solar adventure with the convenience and comfort of knowing that you can have power anywhere there is sunlight!
If you have any questions regarding this product, please submit a case !
Key Features
Efficient
- High solar cell efficiency : Monocrystalline 21.0%
- EL tested solar modules; no hot-spot heating guaranteed
- Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades
- TPT back sheet ensures smooth performance over a long period of time
- IP65 rated junction box provides complete protection against environmental particles and low pressure water jets
- Sealed, Gel Flooded and Lithium charging algorithm ready
- 4-Stage battery charging process for a rapid, efficient, and safe battery charging
- The Renogy Wanderer is equipped with multiple electronic protections; overcharging, overload, short-circuit and reversed polarity
- Pre-drilled holes on the back of the panel allow for fast and secure mounting
Package Includes
|
100W Monocrystalline Panel(Compact Design)
4 x |
Wanderer Li 30A PWM Charge Controller
1 x |
|
4 x |
20ft 10AWG MC4 Adaptor Kit (A pair)
1 x |
|
8ft 10AWG Tray Cables (A pair)
1 x |
3 x |
| 100W Monocrystalline Solar Panel(Compact Design) |
Wanderer Li 30A PWM Charge Controller |
|---|---|
| Maximum Power: 100W | Nominal system voltage :12V Auto Recognition |
| Maximum System Voltage:600V DC (UL) | Max. PV Input Voltage: 25 VDC |
| Open-Circuit Voltage (Voc): 24.3V | Rated Charge Current: 30A |
| Short-Circuit Current (Isc): 5.21A | Max. PV Input Power: 400W (12V) |
| Optimum Operating Voltage (Vmp): 20.4V | Self-Consumption: <10mA |
| Optimum Operating Current (Imp): 4.91A | High Voltage Disconnect: 16V |
| Weight: 14.1 lbs/6.4 kg | Boost Duration: 120 min |
| Dimensions: 41.8 x 20.9 x 1.38 in | Weight: 0.65 lbs |
| Dimensions: 6.45 x 4.31 x 1.76 inches |
| 8ft 10AWG Tray Cables (A pair) | Mounting Z Brackets (Set) |
|---|---|
| Length: 8ft | Eight Long Cap Bolts and Four Short Bolts |
| AWG: 10 | Four Spring Washers and Four Washers |
| Rating Voltage: 600/1000V | Four Z Shape Solar Panel Brackets |
| Temperature: -40°F to +185°F | Four Nuts |
| Adaptor Kit (Set) | |
|---|---|
| Length: 20ft | AWG: 10 |
| Rating Voltage: 600/1000V | Temperature: -40°F to +185°F |
Warranty Information
| Panels |
25-year transferable power output warranty: 5 year/95% efficiency rate; 10 year/90% efficiency rate; 25-year/80% efficiency rate 5-year material and workmanship warranty |
| Accessories | 1-year material warranty |
 |
|||
 |
|||
| Please click the links below to download the manuals: | |||
| 30A PWM Wanderer Li Charge Controller | |||
